Shenyang Xingzhenghe Chemical Co., Ltd. is a professional acrylic acid manufacturer, mainly engaged in acrylic acid, butyl acrylate and other products, one of the largest domestic manufacturers of the same product, Tel: 13889850231 / 13889850232
Appearance of the product: component A is water white or yellowish clear transparent liquid; component B is colored viscous liquid.
Features: Used in plastic stadium bottom material, with high strength, good elasticity, wear resistance, anti-aging, hardness, durability, excellent rebound and compression recovery, excellent performance, basketball court, volleyball The ideal materials for sports venues such as stadiums, tennis courts and badminton courts.
Usage: First weigh a certain amount of component A in the batching bucket, add component B according to the ratio of 1:5, stir evenly with electric mixer, then add the metered catalyst and stir evenly to construct.
Storage method: Store in a cool and cool place at room temperature, avoid direct sunlight, and pay attention to moisture.
Acrylic fabric is a one-component self-drying weather-resistant anticorrosive coating prepared on the basis of traditional acrylic resin by adding advanced long-life chlorosulfonated polyethylene rubber, weather-resistant filler and weathering additive.
Acrylic intermediate coating is an aqueous emulsion that can be used directly in open buckets and water, applied to the middle layer of the golf course. Provides excellent adhesion and moisture resistance, mildew resistance and aging resistance. It can not be immersed in water for a long time, and it is not separated from the layer. The price is moderate. Add special UV anti-UV and anti-oxidant, and add organic red to the pigment to make the product have good performance in fading and aging resistance. Acrylic intermediate coating is the cornerstone and support layer of acrylic structure. It is not only the real protective layer of cement foundation, but also completely covers the cement foundation seal. At the same time, it contains quartz sand to make it have a certain thickness, and the cement foundation is not subtle. Leveling has a certain leveling effect.
The primer is a bridge between the acrylic coating and the cement base. The primer itself is also a pure acrylic material, and the bond between it and the acrylic coating applied later is a combination of the same material, and the bond is firm; at the same time, it can penetrate into the pores of the concrete and the concrete. A bond is formed between them to ensure a strong bond between the entire acrylic coating and the hydraulic foundation, thereby fundamentally avoiding quality problems such as delamination, delamination and peeling of the acrylic coating. Acrylic concrete primer is specially formulated to have strong permeability, strong adhesion and moisture-proof and waterproof function. It is the key to the quality of the entire acrylic structural layer.
The acrylic varnish is mainly composed of an acrylic resin to which a part of toluene, butyl ester and xylene are added. Among them, toluene, butyl ester and xylene are known to be some toxic substances. They account for nearly 20% of the total. It can be seen that there are many harmful substances in acrylic varnish. What kind of use is this paint? .
Acrylic varnishes are generally used in places where outdoor conditions are poor because they have excellent weatherability and heat resistance and have good light resistance. It is usually applied to the surface of aluminum alloys, and of course it is also used as a sealer for wood coatings. Even some bad manufacturers use it to make furniture paint.
Acrylic paint is a superior coating with protection, decoration and protection, and it is also a surface coating material with special functions such as conductivity, temperature, fireproof and camouflage. Acrylic paint is one of the most cost-effective paints in various paints. It is not only low in cost, but also more effective. It has achieved rapid development due to its convenient construction. Now it has become a mechanical, electronic, chemical, national defense and other Materials indispensable in the field of science and technology.
The downstream of acrylic acid is mainly paint, adhesive and SAP (superabsorbent resin). The former two are mainly used in the field of building decoration, which is greatly affected by real estate, while the latter is used for disposable sanitary products, and the demand for rigid fluctuation is small.
What is acrylic resin,
We first need to understand the composition of some acrylic resins, which are made up of acrylates and methyl propionates.
Other resins made by copolymerization of olefinic monomers, we can choose different resin structures, different formulations, production processes and solvents, etc., can synthesize acrylic resins of different types, different properties and different applications, and acrylic Resin can be divided into thermoplastic acrylic resin and thermosetting acrylic resin according to the difference of structure and film formation mechanism.
Acrylic latex paint
It is usually made of acrylic emulsion, with pigment filler, water and various additives. Acrylic emulsion paint has excellent performance and comprehensiveness, good adjustability, no organic solvent release, etc. It has high original gloss, excellent gloss retention, color retention and outdoor durability, good anti-staining and alkali resistance. Sex and scrubbing. It can be made into various internal and external latex paints such as light, semi-light and flat light. Acrylic latex paints are moderately cost-effective and widely used, and are a very rapid development of coatings. ,
Copyright © Shenyang Xingzhenghe Chemical Co., Ltd. All rights reserved Technical Support: Shenyang Jinwen Network Technology Co., Ltd.
National Service Phone:024-86820560 Fax:024-86820560
Company address:No. 33, South Second Road, Heping District, Shenyang